SCALES WEIGHT AND BODY WITH HIGH SOUND OUTPUT

In describing the design of signal processing hardware voltage generated by the measuring instrument in this case the load cell as a measure of weight and shear resistor resulting from the roll of the email system as a measure of height
At the height weighing system the ends of the coil is given shear stress, while shifting 5 volts using a ferrite rod which point the shift in the ferrite produces an output voltage based on the principle of voltage divider resistors
Teganganpengatur composition calibration circuit voltage generated by each sensor. thus has two functions is to enlarge the amplitude of the DC offset as well as its regulator.

Catatan : Jangan Lupa Baca dan Klik Dibawah ini ya

Artikel Keren Lainnya